Home > Climatic Test Chamber >

-40℃~180℃ Industrial Environmental Chambers 3C Product Environmental Testing

Product Categories

Climatic Test Chamber [47]
High Altitude Test Chamber [23]
Solar Simulation Chamber [18]
Sand&Dust Test Chamber [25]
Temperature And Humidity Test Chamber [25]
Rain Test Chamber [21]
Thermal Shock Test Chamber [22]
Walk-in Environmental Test Chamber [20]
Accelerated Aging Test Chamber [17]
Salt Spray Test Chamber [14]

Envsin Instrument Equipment Co., Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

-40℃~180℃ Industrial Environmental Chambers 3C Product Environmental Testing

Ask Lasest Price
Brand Name :	Envsin
Model Number :	EQF
Certification :	CE
Payment Terms :	T/T, Western Union

Add to Cart

Product Details
Company Profile

-40℃~180℃ Industrial Environmental Chambers 3C Product Environmental Testing

-40℃~180℃ Industrial Environmental Chambers 3C Product Environmental Testing

Technical Features:

★Temperature Range:-40℃~180℃

★Temperature uniformity:≤2.0℃

★Temperature Deviation:±1.0℃

★Heating rate: 5℃/min Cooling rate: 3℃/min

★Humidity Uniformity: ±5.0%RH

★Test Space:190/335/600/990/1540L

-40℃~180℃ Industrial Environmental Chambers 3C Product Environmental Testing

Technical Parameters

Temperature test	Temperature range:-40℃~180℃	Remark: 1. Test in accordance with GB/T2423 and IEC60068 under empty chamber condition (except indicated). 2. The test data of the water-cooled test chamber are under the conditions that the water temperature is less than 28, the water pressure is between 0.3Mpa and 0.6Mpa, and the water pressure difference between inlet and outlet is more than 0.2Mpa.
	Temperature uniformity:≤2.0℃
	Temperature deviation:≤±2.0℃
	Temperature fluctuation:≤±0.5℃
	Temperature rate:≥1℃/min
Temperature and humidity climatic test	Humidity temperature control range:10℃~+85℃
	Humidity range:10%RH~98%RH
	Humidity uniformity:±5.0%RH
	Humidity deviation: +2.0%~3%RH(>75%RH)±5%R.H(≤75%RH)
	Humidity fluctuation:±5.0%RH
Gas concentration	5ppb~30ppm
	The deviation of gas concentration in the chamber shall not exceed 10% of the set concentration,Concentration uniformity deviation of 10%
	The empty chamber operation request meets the IEC60068-2-60 standard
Gas concentration measurement	By calculating the volume ratio and then through the mass flowmeter measurement
On load capacity	500W,The temperature can be stable, the chamber body is not deformed
Noise	Working noise ≤70dB (measured at 1 meter away from the test chamber)
Wind speed	≤1.7m/s
Gas flowmeter	H2S,SO2,NO2,CI2

Standard	GB/T 2423.1-2001 / (IEC60068-2-1:2007) Test A: Low temperature test method

	GB/T 2423.2-2001 / (IEC60068-2-2:2007) Test B: High temperature test method

	GB/T 2423.3-2006 / (IEC60068-2-78:2007) Test Cab: Constant humidity and heat test

	GB/T 2423.4-2008 / (IEC60068-2-30:2005) Test Db: alternating humidity and heat test

	GJB 150.3-1986 / GJB 150.3A-2009 High-temperature test

	GJB 150.4-1986 / GJB 150.4A-2009 Low temperature test

	GJB 150.9-1986 / GJB 150.9A-2009 Thermal-humidity test

	IEC60068-2-60 Test Method KE: Man-made low concentration pollution gas corrosion test

	GB/T2423.51-2000 Environmental testing of electrical and electronic products Test KE: Flow mixed gas corrosion test

Product Tags:

H2S laboratory test chamber

CE laboratory test chamber

SO2 gas sensor test chamber

-40℃~180℃ Industrial Environmental Chambers 3C Product Environmental Testing

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Envsin Instrument Equipment Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

Explore more Climatic Test Chamber products from this supplier

Find Similar Products By Category:

Measurement & Analysis Instruments

Hot Searches: